Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Frankford?
Torsion spring replacement in Frankford typically costs $180 – $340 for one spring. Most doors carry a matched pair, and since both springs wear at the same rate, the pair is usually replaced together at roughly twice that range. That figure includes the spring, the labor, and a balance check on the door; the written estimate you get after we look at the door is what sets the final price.
We answer 24/7 at (855) 337-1053, and we schedule fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and we’re closed Saturday.
Spring Replacement Cost Breakdown (2026)
Here’s how the work breaks down for a Frankford home. These are typical estimated ranges, not a quote for your specific door:
| Service | Typical Estimated Range |
|---|---|
| Torsion spring replacement, one spring | $180 – $340 |
| Torsion spring replacement, matched pair | About twice the single-spring range |
| Extension spring replacement | $180 – $340, priced per spring |
| Cable repair (often done with springs) | $130 – $250 |
| Roller replacement | $110 – $220 |
| Track realignment | $120 – $240 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| General garage door repair | $150 – $600 |
| New door installation | $700 – $2200 |
Two things push the number toward the top of the range. The first is spring type: torsion springs sit on a shaft above the door and extension springs run along the tracks on either side, and they’re different jobs with different hardware. The second is what the spring took with it. A snapped spring usually leaves the door hanging on cables and the opener straining to lift a dead weight, so we check the cables, the drums, and the opener before we call the job done. Sometimes the spring is the only thing that failed. Sometimes it isn’t, and you’ll know which before we start.
What Affects Spring Replacement Pricing in Frankford
- One spring or two. Torsion systems use a pair, and replacing one worn spring while leaving its twin in place means the older one fails soon after. We’ll tell you what we see and let you decide. The pair price is about twice the single-spring range.
- Door weight and size. A single-car door in Frankford’s older rowhouses and twins carries lighter springs than a wide two-car door. Heavier doors need a higher spring rating, and the part costs more.
- Torsion versus extension. Torsion springs run above the door on a shaft. Extension springs run alongside the tracks and need safety containment because they stretch under load. The hardware and the labor differ, so the estimate does too.
- Age of the surrounding hardware. In Frankford, many garages sit behind homes built decades ago, and the doors have been repaired more than once. If the cables, drums, or rollers are the same age as the failed spring, we’ll flag it. Replacing a spring into worn cable is how a second breakdown gets scheduled.
- Access and the space around the door. A tight alley-side garage or a door hemmed in by stored items slows the work and sometimes requires moving things first. We’ll ask about access when we book, so the estimate reflects the real job.
- Brand and part availability. Door brand shapes how the spring is sized and mounted. We’re equipped to service Clopay, Amarr, Wayne Dalton, and Raynor doors, plus LiftMaster, Chamberlain, Genie, and Craftsman openers, so the hardware matches the door you actually have rather than a generic swap.
How to Save on Spring Replacement
The biggest savings come from fixing the spring before it fails. Springs don’t break at a convenient moment; they break when the door is under the most load, which is why a spring that’s been noisy or sluggish for weeks is a warning, not a personality quirk. When one spring in a pair has already snapped, replacing both together costs less than two separate visits and two separate labor charges.
Here’s the rest of what we’d tell a neighbor:
- Get the estimate in writing before work starts. A free estimate should tell you the spring type, whether it’s one or a pair, and what else needs attention. Call (855) 337-1053 and we’ll come look.
- Don’t replace just the broken spring if the pair is the same age. The labor is the same for one or two; only the part cost changes. Two springs, one visit.
- Leave the door down and don’t run the opener. A door with a broken spring is dead weight on the opener. Running it can burn out the motor and turn a spring job into an opener job.
- Ask whether the cables and rollers are due. Bundling a cable repair ($130 – $250) into a spring visit saves a second trip charge and a second set of labor.
- Skip the DIY spring swap. We’ll say this plainly: torsion springs are under extreme tension and are the most dangerous part of the trade. A spring that’s unloaded wrong can injure hands, arms, and eyes in an instant, and no online video changes that. This is a job for a trained technician with the right winding bars and a solid safety history.
We can tell you in one visit whether you’re looking at a spring only, or a spring plus cables, and the estimate will spell that out. Our technicians have up to 12 years of experience on garage doors, and our work is 100% garage doors, so we know what fails together and what can wait.
FAQs – Spring Replacement Cost
What’s the average spring replacement cost in Frankford?
Spring replacement in Frankford typically costs between $180 and $340 for a single spring, and roughly double that for a matched pair. The high end of the range covers heavier two-car doors and jobs that involve replacing both springs at once. Call (855) 337-1053 for an exact quote – estimates are free.
Is it cheaper to repair or replace a broken spring?
Replacing the spring is almost always cheaper than replacing the door; the only time a new door makes sense is when the door itself is damaged beyond economical repair, which starts around $700 and runs to $2200 for a full installation. A spring job at $180 – $340 is a small fraction of that. Call (855) 337-1053 and we’ll tell you which side of that line your door is on.
Can you come today to replace my spring?
Yes. Broken springs are one of our core services and we schedule same-day repair when the schedule allows. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (855) 337-1053 to get on the board.
How long does a spring replacement take?
Most spring replacements are done in under two hours: one visit, from arrival to a fully balanced door. If cables or rollers are added to the job, plan on a bit longer. Call (855) 337-1053 and we’ll give you a realistic window when we book.
Do you replace just one spring or both?
We can do either, but matched springs are installed in pairs and wear at the same rate, so replacing only the broken one usually means the second fails soon after. Replacing both at once costs about twice the single-spring range, which is $180 – $340 per spring. Call (855) 337-1053 and we’ll walk you through the tradeoff for your door.
Why Frankford Homeowners Call Us for Spring Work
Spring repair is the part of garage door work most generalists won’t touch, because a torsion spring is the one component in the trade that can genuinely hurt you if handled wrong. We take it on directly. Every tool and every part we carry is for garage doors, and our brand coverage extends to the equipment most Frankford garages already have: Clopay, Amarr, Wayne Dalton, and Raynor doors, and LiftMaster, Chamberlain, Genie, and Craftsman openers. When we look at your door we diagnose the actual brand and model in front of us instead of guessing at a generic fit.
That same focus carries into the rest of the job. If your spring failed because the opener was fighting a binding track, we find that too, because the right fix isn’t just the spring. And if the door won’t close and the house is open to the street, that’s a call we take seriously. (855) 337-1053 is answered 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. If you call outside those hours, we’ll book you into the next opening.
One more thing worth saying plainly: prices in Frankford for this work are estimates, and the written estimate is what sets the final price. We don’t surprise you with the bill. Call (855) 337-1053, get a free estimate, and let’s get your door back in operation today.
Pricing reflects the Frankford market as of 2026. Garage Door Repair Frankford offers free estimates – call (855) 337-1053.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Shanice Dawson"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Roger Lawson"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Angela Wong